91ÖÆƬ³§

Steamfitter/Pipefitter Apprenticeship

Steamfitters/Pipefitters install, alter and repair steam and hot water boilers and systems for generation and conveyance of steam and hot water and process piping systems in industrial projects of manufacturing plants.

Level 1 = 7 weeks
Level 2 = 7 weeks
Level 3 = 8 weeks
Level 4 = 8 weeks

Share this program

  Email   Print
Steamfitting/Pipefitting students work with instruments to measure the pressure inside pipe systems

Campus

  • Kelowna
View training schedule
Legend:
  • Full program offered
  • Partial program offered

Credential

Apprenticeship

Delivery options

Full-Time

Tuition and fees

Tuition and fees are dependent on the level of apprenticeship study.

Program details

Level 1 Program Outline
  • safe work practice
  • use tools and equipment
  • organize work
  • prepare and assemble piping components

Level 1 Textbooks
  • Piping Trades Apprenticeship Program Line A: Use Safe Work Practices: $54.25
  • Piping Trades Apprenticeship Program Line B: Tools & Equipment: $85.75
  • Piping Trades Apprenticeship Program Line C: Organize Work Binder: $63.50
  • Piping Trades Apprenticeship Program Line D: Prepare and Assemble Components: $94.50

5% GST is not included in price. Price is subject to change.


Required supplies
  • CSA-approved steel toed work boots
  • CSA-approved hard hat
  • safety glasses
  • Architect's scale rule (with imperial measurement)
  • binder
  • pencils, pens, erasers
  • calculator to write IP exams, preferably one of: Sharp EL-520W, EL-520X, EL-531X

Government-issued picture ID is required to write the provincial and national exams: driver's licence, photo ID or valid passport. Student ID cards are not acceptable.

Level 2 Program Outline
  • use tools and equipment
  • organize work
  • prepare and assemble piping components
  • install hydronic heating and cooling
  • perform layout, fabrication and installation
  • special application system

Level 2 Textbooks
  • Steamfitter/Pipefitter Level 2 Course Pack: $34.50
  • Steamfitter/Pipefitter Level 2 Module Package (ISBN:7850000774): $66.50

5% GST is not included in price. Price is subject to change.


Required supplies
  • CSA-approved steel toed work boots
  • CSA-approved hard hat
  • safety glasses
  • Architect's scale rule (with imperial measurement)
  • binder
  • pencils, pens, erasers
  • calculator to write IP exams, preferably one of: Sharp EL-520W, EL-520X, EL-531X

Government-issued picture ID is required to write the provincial and national exams: driver's licence, photo ID or valid passport. Student ID cards are not acceptable.

Level 3 Program Outline
  • organize work
  • special application systems
  • water supply
  • install natural gas and propane systems

Level 3 Textbooks
  • Piping Trades Apprenticeship Program Line A: Use Safe Work Practices, $54.25
  • Piping Trades Apprenticeship Program Line B: Tools and Equipment, $85.75
  • Piping Trades Apprenticeship Program Line C: Organize Work Binder, $63.50
  • Piping Trades Apprenticeship Program Line D: Prepare and Assemble Components, $94.50

5% GST is not included in price. Price is subject to change.


Required supplies
  • CSA-approved steel toed work boots
  • CSA-approved hard hat
  • safety glasses
  • Architect's scale rule (with imperial measurement)
  • binder
  • pencils, pens, erasers
  • calculator to write IP exams, preferably one of: Sharp EL-520W, EL-520X, EL-531X

Government-issued picture ID is required to write the provincial and national exams: driver's licence, photo ID or valid passport. Student ID cards are not acceptable.

Level 4 Program Outline
  • organize work
  • special application systems
  • install natural gas and propane systems

Level 4 Textbooks
  • Steamfitter/Pipefitter Level 2 Course Pack, $34.50
  • Steamfitter/Pipefitter Level 2 Module Package ISBN:7850000774, $66.50

5% GST is not included in price. Price is subject to change.


Required supplies
  • CSA-approved steel toed work boots
  • CSA-approved hard hat
  • safety glasses
  • Architect's scale rule (with imperial measurement)
  • binder
  • pencils, pens, erasers
  • calculator to write IP exams, preferably one of: Sharp EL-520W, EL-520X, EL-531X

Government-issued picture ID is required to write the provincial and national exams: driver's licence, photo ID or valid passport. Student ID cards are not acceptable.

The textbook list above was current at the time it was posted and may be used for initial planning purposes. Please check back with the bookstore 2 weeks before your program starts under Current Book List for a final, updated list of book titles and prices, and to order!

Textbooks available online only at . If you have any questions, call 250-862-5638 or email campusstores@okanagan.bc.ca.

It takes approximately two to three business days to fill the online orders, please be sure to purchase the necessary items prior to the 1st day of class.

SteamfitterPipefitterApprenticeship

Admission requirements

  • Registered as an apprentice with ITA BC.
  • Must be working for an employer with at least one qualified journeyperson. 
  • Not registered as an apprentice? Ask your employer to register you as an apprentice with the Industry Training Authority (ITA). It’s free, simple, and can be completed within a few minutes online or printed and mailed to the ITA Head Office. More details can be found at 

Financial Incentives

The Apprenticeship Incentive Grant provides direct support to apprentices in the first two years of an approved apprenticeship training program (Red Seal trades). The taxable grant is $1,000 for Level 1 and $1,000 for Level 2. This grant is only available after you have completed the specified level of technical training and have a specific number of work-based hours on your SkilledTradesBC transcript.

Please note this benefit will end March 31, 2025 – all students who complete their technical training and work-based hours before this date may still apply until March 31, even without receipt of their Confirmation of Progression letter from STBC.

The Apprenticeship Completion Grant is a $2,000 taxable cash grant for apprentices who complete their apprenticeship training and obtain Red Seal endorsement or a provincial/territorial certificate of qualification in a designated Red Seal trade.

Please note this benefit will end March 31, 2025 – all students who complete their technical training and work-based hours before this date may still apply until March 31, even without receipt of their Confirmation of Progression letter from STBC.

WorkBC Apprenticeship Supports

Apprentice financial supports are available to eligible apprentices while they’re completing their classroom apprenticeship training. Apprentices may be able for supports which cover costs such as child card, transportation, disability, and more. Once an apprentice , a 16-digit reference code will be emailed to them. Use the 16-digit reference code for the Service Canada EI application. 

Service Canada EI Application

Apprentices attending full-time technical training (sometimes referred to as block-release training), they may be eligible to receive Employment Insurance (EI) benefits while unemployed and attending your course. Refer to the .

Apprentices registered in a Red Seal trade apprenticeship program who meet the eligibility requirements may receive up to $4,000 in loans per period of technical training. The purpose of the CAL is to provide apprentices registered in Red Seal trades with loans to assist with the costs to attend technical training.

The LNG Canada Trades Training Fund supports small and medium employers that employ, sponsor and train apprentices in Northwest BC.  To be eligible to apply for funding support, the employer and student need to be a resident of Northwest BC (Terrace, Kitimat, Prince Rupert, and surrounding areas of Highway 16 to Houston, BC).  Applications to the Trades Training Fund can be made by employers with business operations in Northwest BC on behalf of their apprentices and must be received one month prior to the class start.

The federal government will now provide tax recognition for the costs that many employed tradespeople incur to provide their own tools in their employment duties. A deduction (up to a maximum of $500/year) will be allowed for the total cost of new tools acquired by an employed tradesperson in a tax year in excess of $1000. Employer will need to certify that the employee is required to obtain those tools for use in employment activities.

Apprentices who complete their third and four year of any apprenticeship program may be eligible for a tax credit. The apprentice will receive the tax credit when they file their annual income taxes. Apprentices will be eligible for a tax credit of $2,000 for completing Level 3 and a credit for $2,500 for completing Level 4 of any apprenticeship. For more information visit www.sbr.gov.bc.ca

Your T2202A tax form is available online via myOkanagan on the last day of February.
To access your tax form:

  1. Login to
  2. Username: firstname.lastname@myokanagan.bc.ca
  3. Password: birthdate (mmddyyyy) (you will be asked to update your password the first time you login)
  4. Click the "T2202A Tax Form" link under Online Services

If you have any problems accessing your myOkanagan account, please call IT Services at 1-866-839-4032 or complete an online myOkanagan .

Additional information

View the official Calendar details and policies
Learn more about the department
View the Tuition and fees page

Ask

Have your questions answered by a Trades and Apprenticeship staff member.

Register

Register with SkilledTradesBC prior to applying to an apprenticeship program.

Apply

Take the next step and enrol in an apprenticeship program at 91ÖÆƬ³§.